Easy Indoor/Outdoor USA Flag Banner

A step by step tutorial for a patriotic flag banner made using canvas drop cloth. It's super budget-friendly, you can make it in an afternoon, and it's equally as cute indoors as outdoors!
summer porch with painted flag/banner
Updated April, 2022

Affiliate links may be included for your convenience; my full disclosure policy can be found here. If you click through and make a purchase I'll receive a small commission at no extra cost to you!

I wasn't born a US citizen, in fact, I've only had my citizenship since 2016! You can find out more about me here.

I love the country of my birth, but I love America too! Decorating with the USA flag always makes me smile. It's a proud country, a strong land and I appreciate the freedoms I enjoy.

I was inspired by this banner I saw on Antique Farmhouse (one of my favorite sources for beautiful home decor with a vintage farmhouse vibe). I knew a DIY version would look great on my front porch, so I set out to make my own version using canvas drop cloth! I wanted my flag to have a vintage look, rather than a mass-produced perfect look. I'm including the supplies list as well as a step-by-step tutorial for you to make your own patriotic flag banner!

Supplies for Flag Banner


supplies


How to Make a Flag Banner


I love using fabric drop cloth because it's inexpensive, has a great nubby texture and neutral color! I keep several on hand. For this project, I actually used a drop cloth that I've used as a drop cloth! In other words, it had a few drips of paint on it, but that didn't put me off at all! It just adds to the vintage feel πŸ˜ƒ 

Here are some other drop cloth DIYs you might like:

Here's how to make the drop cloth flag banner.

Rip Drop Cloth to Size

The first step to creating the flag banner (after you wash and dry it) is to rip your drop cloth to the size you want. Yes, I said RIP! It's much easier to get a straight line that way, plus it leaves a nice, frayed edge. My drop cloth ended up being 11-3/4" wide (including fringe) by 68" long.

Secure Long Edges

Next, fold your drop cloth in half, making sure edges line up. Sew (or glue) the sides and bottom with a wide stitch. Doubling the drop cloth helps to add to the weight of it which allows it to hang nicely.

drop cloth

Before we start painting, we need to mark off the top section for the stars. To do this, fold one corner of the drop cloth down until the edge lines up. Mark this spot. This creates a perfect square. If you prefer a rectangle, then by all means do that!

make a square

Math Challenge

Before we get to the fun part, aka painting, we need to do a little math.😟😟😟 I am the first to admit that math is NOT my strength! In fact, I had quite a time figuring out how to make 5 even stripes! I even asked Google but then I had to figure out where 2.33" was on my measuring tape. πŸ˜• Okay, stop laughing...I can hear you!! (and I KNOW that Mr DIY is rolling his eyes!) In the end, I mostly eyeballed it πŸ˜‰ You can see that I have a piece of tape dividing the stripes section from the stars section. Press down firmly on the edges of your tape all the way down every side so you don't get any seepage!

tape off stripes

Prep your Paint

For this step, you'll need two paper plates. Pour a little red paint onto one plate. Fold several paper towels and lay them on the other plate.

Roll your foam roller in the paint to saturate it, and then roll the paint off onto the paper towel a couple times.

Designer Tip: Any time you use a stencil (whether purchased or homemade, like the taped stripes) you will get the best results by removing most of the paint before taking your brush or roller to your project! You can always add more paint if you want, but you can't remove it!

use paper plates for paint


Paint the Stripes

Run the roller down each stripe, being careful to paint over the fringe too. In hindsight, I probably should not have used a piece of cardboard to protect my desk because I ended up with cardboard lines on my flag. When I stenciled drop cloth curtains a few years ago, I used another drop cloth to protect my table. But for this project, I was wanting a vintage, washed-out look, so I wasn't bothered by the lines.

roll on paint

Once you've painted each of the red stripes, immediately remove the tape. Love those nice, crisp lines!

remove tape


Create the Stars Stencil

I have told you guys how much I love my Silhouette machine! I use it for home decor projects all the time and it saves so much time and money! I purchased mine as a bundle with a ton of vinyl and tools and I highly recommend going that route if you are looking to purchase one. You will also receive several tutorials and courses to help you get started. 

I created a design of 50 stars by measuring my drop cloth square (that I marked off above), and then applying that size to my Silhouette project. I picked a star design, shrunk it to the size I thought I'd need, and then simply duplicated it. Once I had a row that was spaced evenly, I duplicated that to create additional rows. You'll see I have 6 rows of 5 stars and 5 rows of 4 stars...which equals 50 stars! I cut the stars onto a piece of cardstock, which is a fantastic way to save your vinyl when you're making a one-time-use stencil! I used the weeding tool to pull the stars off to create my own stencil (keeping the cardstock on my mat until I was done removing all the stars).

star stencil

Did you know I have a YouTube channel? Click to watch this short video to see how easy weeding is. If only weeding the flower beds were this fast and simple!

Paint Star Area Blue

Self explanatory! I know it looks blotchy, but you won't notice that once the stars are added!

paint stars area with blue paint

Paint Stars onto Drop Cloth

Let the blue paint dry and then tape the star stencil in place and paint stars white, remembering to remove a little paint from your brush first!

tape stars stencil in place

stencil stars with white paint

Designer Tip: when using a handmade cardstock stencil, remember to hold each section with your finger while stenciling because there is no adhesive on the backside. Alternatively, you could use a spray adhesive to hold the stencil in place or even just tape the edges!

close up of painted stars

Stain the Stir Sticks

While you're waiting for paint to dry, at any step in the process, go ahead and give your stir sticks one light coat of stain. Wait a couple minutes, wipe the stain off and set those aside to dry.

Add the Hanger

Make sure your stir sticks are dry before you start this step...you don't want to get wet stain on all your hard work! Measure the jute twine to the length you want and cut. Make a knot in each end. Lay one stir stick (stain side out) underneath your banner, lay the jute on top and secure in place with a heavy duty stapler. Then set the second stir stick on top and staple again to hold everything together!

staple jute twine to hang

Before hanging the DIY flag banner up outside, be sure to spray it with a couple coats of waterproof sealant to protect it from water and damp.

I love this little $0 project, and how the DIY flag banner looks on my front porch!

flag banner on front porch with shutters, flowers

But it's equally as cute indoors! I definitely need to make another one so I don't have to keep moving it! It looks so good with the vintage vibes in my home office!

flag/banner hanging on vintage cabinet, shiplap walls

I hoped you enjoyed seeing how easy it is to make a flag banner from drop cloth! If so, please share it with a friend or two who enjoys crafts and DIY! 

Would you like more patriotic crafts and home decor ideas? CLICK HERE to see my complete selection.

PIN IT to remember it!

patriotic flag/banner to use inside or out
bringing beauty to the ordinary,

SIGN UP FOR FREE DIY TUTORIALS

share this post
more

Comments

  1. What a creative idea- and you are super ready for the American holiday trio of memorial, 4th and labor- well done!

    ReplyDelete
  2. Cindy this is an awesome idea and looks like the original one you saw. I might try this if I can find the stars cut out or a great stencil. Thank you.

    ReplyDelete
    Replies
    1. Thanks Di!! There are similar star stencils on Amazon... click the link in my supplies list to see them all!

      Delete
  3. Cindy, your directions are clear and simple. This flag is something I really want to make. Thanks!

    ReplyDelete
    Replies
    1. I'm so glad you found it easy to follow Laura! Thanks for letting me know!

      Delete
  4. Great idea! I LOVE patriotic crafts. Your flag is just adorable. I love the rustic style. And you are right, it looks great both inside and outdoors! Thanks for sharing the tutorial. I can't wait to make my own!

    ReplyDelete
  5. out of a dropcloth!!! ABSOLUTELY brilliant. love it!

    ReplyDelete
  6. Cindy I was looking for something to hand outdoors and I think this would be a perfect fit. Thanks for the inspiration!

    ReplyDelete

Post a Comment

Your comments are like sunshine and chocolate! Thanks for taking the time to leave a nice one ;) I read all comments and love to respond if you leave your email! Otherwise, please look for my response under the post where you left it!